With all its certificates, in high demand for removing dirt with its de-greasing features and with excellent skin protection, this product is especially effective in high traffic areas like MRO Work Shops. It also removes engine oil
and burned oil stains, as well as refreshing and protecting the skin and maintaining its natural balance.
Alcohol based chemical with corrosion removing features used in the cleaning of energy systems and load centers.
Aerock Prom has all its certificates and approvals.
Acetone based chemical with corrosion removing features used in the cleaning of energy systems and load centers.
Aerock Prom Act has all its certificates and approvals.
Utilized in floor scrubbers, with all its certificates and approvals this non-foaming, environmentally friendly, water based, alkaline product is a highly effective floor cleaning compound, especially in areas with heavy dirt and grime build up.
Water based, non toxic, and environmentally friendly product with excellent carbon-removal features.
Diluted in up to ten units of water for routine galley cleansing, it safely mitigates possible smoke and odor
during the cleaning process.
Rinsing may be required after initial cleaning, based on dilution ratio. If used in full strength for heavy cleaning,
surfaces should be wiped off with a damp cloth.
Next-generation disinfectant utilizing silver and hydrogen peroxides. With its AMS 1452C approvals from SMI
and BIOCIDAL Test approvals from EgeMikal Lab excellent for use in disinfecting potable water containers and
lines effectively and economically. Also utilized as an aerosol disinfectant in the cabin.
Highly effective as an antibacterial and a fungicidal: 1x250ml Aerock SNL Blue to 1 ton water.
For best results, pre-cleaning is recommended with a high pressure washer or brushing with soap and water.
This potent, water based, and environmentally friendly product with all its certificates and approvals is effectively utilized in heavy maintenance units and MRO hangar surfaces, as well as cleaning of equipment parts.
May be diluted up to 1/5-1/10 with hot water. Based on level of dirt and grime build up water temperature of 40°C or above should give better results. Safe to use on stainless steel, galvanized steel, plastic, ceramic and glass. Also gives excellent results with its foam application.